Using the hobs
\ Do not allow any object to drop on the
hob. Even small objects such as a
saltshaker may damage the hob.
Do not use cracked hobs. Water may leak
through these cracks and cause short
Circuit.
In case of any kind of damage on the
surface (eg., visible cracks), switch off the
product immediately to minimize the risk of
electric shock.
Control panel
Specifications
On / Off key
Temperature setting/Increasing
timer
Temperature setting/Decreasing
timer
Front Left Cooking Zone Selection
key
Rear Left Cooking Zone Selection
key
Graphics and figures are for informational
purposes only. Actual displays and functions
may vary according to the model of your
hob.
This product is controlled with a touch
control panel. Each operation you make on
your touch control panel will be confirmed
by an audible signal.
16/EN
æ
Wlways keep the control panel clean and
dry. Having damp and soiled surface may
cause problems in the functions.
Turning on the hob
1. Touch the "CD" key on the control panel.
On all cooking zone displays, "0" icon appears
and decimal points flash on lower right corner of
this icon
IF no operation is performed within 20
aseconds, the hob will automatically
return to Standby mode.
Turning off the hob
1. Touch the "®©" key on the control panel.
The hob will turn off and return to Standby mode.
IF "H" symbol appears on the cooking
zone display when the hob is turned off,
this indicates that the cooking zone is
still hot. Do not touch cooking zones.
Residual heat indicator
"H" symbol that appears on the cooking zone
display indicates that the hob is still hot and may
be used to keep a small amount of food warm.
The symbol will disappear when the cooking zone
cools down or when it is activated.
When power is cut off, residual heat
indicator will not light up and does not warn
the user against hot cooking zones.
Turning on the cooking zones
1. Touch"
2. Touch the selection key of the cooking zone
you want to turn on.
2" key to turn on the hob.