• Long press to access settings
• Rotate to navigate
• Press to make selections
Setting
Z2/SUB
Configures preamp outputs: Z2 (rear) or Subwoofer
BEEP
Audible button press confirmation: On or Off
AREA
Configures tuner region: USA, Europe, Australia or Other
DIAG
Displays software version for diagnostics
• Short press to access settings
• Rotate to navigate
• Press to make selections
Setting
BASS
Bass level control from -10 to +10
TREBLE
Treble level control from -10 to +10
BALANCE
Balance control from full left (L10) to full right (R10)
FADER
Fader control from full front (Z1:10) to full rear (Z2:10)
SUB
Subwoofer preamp level control from 0 to +10
EQ
Select EQ presets: Off, Flat, Pop, Classic, Rock
• Short press to access settings/stored presets
• Long press to store a frequency as a preset (up to nine)
• Rotate to navigate
• Press to make selections
Setting
DELETE
Select from stored presets for removal
REPLACE
Permits replacement when all nine preset locations are occupied
CMM20_MAN_ALL.indd 6
CMM20_MAN_ALL.indd 6
SYSTEM MENU SETTINGS
Function
AUDIO MENU SETTINGS
Function
FAVORITES MENU SETTINGS
Function
6
Note
EQ must be set to Off
Z2/SUB must be set to SUB
4/30/21 12:55 PM
4/30/21 12:55 PM