Publicidad
Idiomas disponibles
Idiomas disponibles
straight line, and if possible at right angles to the
workpiece.
4. Never change the operating mode whilst the
rotary hammer is running.
5. Do not apply excessive pressure to the tool
when chiseling. Expressive force does not speed
up the work.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working
controls free of dust. Occasionally you may see
sparks through the ventilation slots. This is normal
and will not damage your power tool.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
TROUBLESHOOTING
1. If your power tool does not start, check the
plug on the power supply first.
2. If your hammer becomes too hot in use, set
the hammer switch to the drill mode and allow
your drill to operate at maximum speed without
load for 2 minutes.
3. If your hammer work efficiency is too low,
please add sufficient grease in the grease box.
4. If your hammer use in low efficiency, please
check whether the tool is blunt.
5. If a fault can not be rectified, return the tool to
an authorized dealer for repair.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice.
GUARANTEE
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least 24
months from purchase. Please keep your receipt
as proof of purchase. If the product is found to
be defective within the duration of the guarantee
period, we will either replace all defective parts
or, at our discretion, replace the unit free of
charge with the same item or items of a greater
value and /or specification.
This warranty is invalid where defects are caused
by or result from:
1. Misuse, abuse or neglect.
2. Trade, professional or hire use.
3. Repairs attempted by unauthorised repair
centres.
4. Damage caused by foreign objects,
substances or accident.
EHLIS, S.A., Polígono Industrial La Veredilla
III, Avenida Valverde, 7 45200 Illescas-Toledo
(Spain) - www.ehlis.es - Made in China.
35
Publicidad
