GE 20 Manual Del Propietario E Instalación página 16

I tallati
I structi
efrigerator
Models 20, 22 and 23
Questions? Call 800.GE.CARES (800.432.2737} or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completelg and carefullg.
• IMPORTANT - Save t hese i nstructions
for local inspector's use.
• IMPORTANT - Observe all g overning
codes and ordinances.
• Note to Installer = Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these instructions for
future reference.
• Skill level -Installation of this appliance requires
basic mechanical skills.
• Completion time - Refrigerator Installation
20 minutes
Water Line Installation
30 minutes
• Proper installation is the responsibilitg of the
installer.
• Product failure due to improper installation is not
covered under the Warrantg.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorwag,
the refrigerator door and freezer drawer can be
removed.
• To remove the refrigerator door, see Step 1 in
the Reversing the Door Swing section.
• To remove the freezer drawer, see the Removing
the Freezer Drawer section.
WATER SUPPLY TO THE ICEMAKER AND DISPENSER
(ON SOME MODELS}
If the refrigerator has an icemaker, it will have to be
connected to a cold water line. A GE water supplg kit
(containing tubing, shutoff valve, fittings and
instructions) is available at extra cost from gour dealer,
bg visiting our Website at GEAppliances.com (in
Canada at www.GEAppliances.ca) or from Parts and
Accessories, 800.626.2002 (in Canada .888.261.:3055).
TOOLS YOU MAY NEED
Adjustable Wrench
3/8" and 5/16" Socket
Ratchet/Driver
1/4" Outer Diameter
Compression Nut
and Ferrule (sleeve)
(icemaker models onlg)
Phillips Head Screwdriver
3/32% 1/8" and 3/16" Allen
wrenches
1/8" Drill Bit and
Electric or Hand Drill
Tape measure
Pencil
1/4" Nut Driver
Wire Cutters
Level
16