Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
17. The output of this heater may vary and its temperature may become intense
enough to burn exposed skin. Use of this heater is not recommended for
persons with reduced sensitivity to heat or an inability to react to avoid burns.
18. Don't leave the heater on unattended.
19. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do
not use on soft surfaces, like a bed, where openings may become blocked.
ASSEMBLY
This heater is pre-assembled in factory.
ELECTRICAL RATINGS
This product is rated 12.5 amps (1500W) at 120V, 60Hz.
FEATURES
Carry Handle (behind unit)
OPERATION
•
Place the heater on a firm, level surface free from obstructions, and at least 3 ft.
(0.9m) away from any wall or combustible material.
•
With the Power and Setting Control in the
grounded 120V outlet. Always operate the heater in the upright position.
•
To turn the heater on, while turning the Power and Setting Control to the
desired position (
•
When the room reaches a comfortable temperature, slowly turn the
ThermostatControl counter-clockwise until the heater goes off. This is the point
at which the thermostat setting equals the room temperature. At this setting, the
thermostat will automatically turn the heater on and off to maintain this selected
temperature.
•
Turn the Power and Setting Control to
using it.
SAVE THESE INSTRUCTIONS
A
B
C
A
B
C
for 600W,
for 900W,
3
Thermostat Control
Power and Setting Control
Power Indicator Light
position, plug the heater into a
for 1500W).
and unplug the heater when you finish
Publicidad
Tabla de contenido
