Mounting on a Table
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
10 cm
2
Connect the power cord to a wall outlet.
cAuTiON
Do not place the TV near or on sources of heat, as
y
this may result in fire or other damage.
using the kensington security system (optional)
The Kensington security system connector is located at
the rear of the TV.
For more information of installation and using, refer
to the manual provided with the Kensington security
system or visit http://www.kensington.com.
Connect the Kensington security system cable between
the TV and a table.
NOTE
The Kensington security system is optional. You
y
can obtain additional accessories from your local
dealer.
10 cm
m
1 0 c
10 cm
ASSEMBLiNG ANd PREPARiNG
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and tighten the
supplied screw on the rear of the stand.
WARNiNG
To prevent TV from falling over, the TV should be
y
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
cAuTiON
Make sure that children do not climb on or hang on
y
the TV.
15