LG 42LP870H Guía De Referencia Rápida página 16

16
ASSEMBLiNG ANd PREPARiNG
Adjusting the angle of the TV to suit view
Swivel screw in position C sets the default swivel angle
to 20°.Moving the screw to position A on the bottom of
the stand will allow a swivel angle range of 45°. Moving
the screw to position B will allow a swivel angle range of
90°.
20˚
c
NOTE
Only one swivel screw is included and
y
attached to position C.
cAuTiON
Removing the swivel fixing screw will allow the
y
set to rotate 360°.
When adjusting the angle of the TV, watch out
y
for your fingers.
- Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may
fall, causing damage or injury.
20˚
A
B
Attaching the TV to a desk
(Depending on model)
The TV should be attached to a desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
TYPE 1
4-Screws
(Not provided as parts of the product)
Stand
NOTE
Screw: M5 x L (*L: Table depth + 8~10 mm)
y
ex) Table depth: 15mm, Screw: M5 x L25
TYPE 2
2-Screws, 2-Washers, 2-Nuts
(provided as parts of the product)
Stand
desk
desk