Publicidad
Idiomas disponibles
Idiomas disponibles
Armada Technologies
Receiver Operation –
Turn on the receiver. From the "Ready" screen select which tracing
mode you will be using (connectionless, or direct clip-on LO-F or
HIF, matching the mode of the Transmitter. When Start is then
selected, the receiver becomes active, with the display indicating
the signal level detected. The controls can also be used to increase
the receiver volume.
When the receiver is active the receiver antenna can be switched
from Peak to Null modes with the press of the center Mode button,
as required for tracing.
SETUP OPTIONS:
Receiver SETUP menu as follows:
Pro900™ LOCATOR USER GUIDE
User options are accessible via the Pro900™
10
Publicidad
