Descargar Imprimir esta página

Hunter Engineering Company Edge QT Serie Instrucciones Funcionamiento página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 95
Do not operate the unit if it requires service or if protective covers
and housings are damaged .
Using this equipment in any manner other than specified by Hunter
may disable its safety features .
Save these instructions .
Laser Activation
Vehicle drivers over trigger 1 turning on laser .
Vehicle drivers over trigger 2 takes picture of the tire & tread
and then turns the lasers off .
Image 1.
Decal Information and Placement
Top View
Decals 128-1566-2 indicates the locations of laser apertures .
Decal 128-1565-2 indicates laser radiation is present .
Laser apertures by arrows
Image 2. Laser apertures
Image 3.
The Class 3R laser apertures are located inside the sensor
assembly .
CAUTION: Class 3R lasers are potentially hazardous
under direct and specular reflection if the eye is focused
and stable . They are hazardous if viewed with an optical
instrument .
4
Sensor View
FDA standards for Class 3R laser compliance are shown on Decal
128-1795-3 .
Image 4. Decal location
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
638/658nm <7mW CW
EN/IEC 60825-1 2014 (2007 USA)
ÉVITER TOUTE EXPOSITION DIRECTE
PRODUIT LASER DE CLASSE 3R
638/658nm <7mW CW
Complies with FDA performance standards for
laser products except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007.
Conforme aux normes de performance de la
FDA pour les produits laser sauf les déviations
conformément à l'avis de laser no. 50 du 24
Image 5. Explanatory/ Certification/ Warning Label
A manufacturer's identification label is also on the top of each sensor
assembly .
MODEL NO.
PART NO.
VAC
AMPS
PHASE
SERIAL
NO.
Image 6.
LASER LIGHT
RAYON LASER
AVEC LES YEUX
Juin, 2007.
128-1795-2-18
SERIAL NO.
HERTZ
English

Publicidad

loading

Este manual también es adecuado para:

Edge qte serie