Use; Controller - BH SHIATSU Prince M400 Instrucciones De Montaje Y Utilización

USE.-

Plug the cable into a wall socket and set the switch
to the "ON" position, the chair is now in standby
mode.
Standby mode is with the backrest up and the leg rest
folded in.
Only the following keys will work in this mode:
ON/OFF,
raise backrest,
recline legrest.
● CONTROLLER.-
ON/OFF control key
Press the button once and you will hear the PRINCE chair starting,
the backrest will recline to a comfortable position and the massage
time (15 minutes) will appear on the display, any massage function
button can now be pressed.
By pressing the
and the massage rollers will return to their original position.
Movement key.-
This key is used to adjust the angle of the backrest and legrest to the
desired position.
Recline/Raise backrest.-
Control keys for adjusting the angle of the backrest
These two control buttons allow you to recline or raise the backrest.
Press the desired key once to place the backrest in a comfortable
position and then press it again to confirm the position.
Raise/Lower the legrest.-
Control keys for adjusting the angle of the legrest
These two control buttons allow you to lower or raise the legrest.
Press once to place the legrest in a comfortable position and then press it again to confirm the
position.
Recline and
Lift and
button again all of the massage functions will stop
19
M400
Fig.7