Trouble Shooting - BH SHIATSU Prince M400 Instrucciones De Montaje Y Utilización

1. Designed with legrest length adjustment to provide a comfortable leg postion, along with
various massage functions, consequently achieving the most effective of massages.
2. The angle of the backrest and legrest can be adjusted to the user's needs, to achieve the
most effective of massages.
3. The air pressure massage has been designed specifically for use on the feet and calves.
4. The ergonomic design is the result of exhaustive research to achieve the best massage
possible.

TROUBLE SHOOTING

This massage chair is controlled by a microcomputer, susceptible to fluctuations of ±10-15% in
the electricity supply. In such cases the massage chair may produce the following problems:
Problem
Rasping sound
during use
It does not operate
It is not possible to
raise or lower the
backrest or footrest
It is not possible to
extend the footrest
normally.
If the above solutions do not solve the problem, switch the chair off and unplug it from the wall
socket, then get in touch with your Technical Assistance Service or local retailer, who will
remedy the fault.
Check the following
This is due to the construction of the chair or
friction between the massage rollers and the
leather upholstery,
The remote control unit works but not the
chair.
Neither the remote control unit or the chair
work.
Is it plugged into the electrical wall socket
It is switched off
The fuse has blown
Is the backrest or footrest overloaded
The footrest is too close to the floor, which is
activating the floor proximity sensor.
The chair may have overheated
due to prolonged use. Switch it off
and let it cool down for 30-50
minutes.
(1)
appropriate program.
Wait a few seconds and press the
ON switch again.
(2) Switch the chair OFF and ON
again to restart it.
Plug it in.
Switch it on
Replace the fuse with a similar
type
Reduce the load or pressure on
the backrest or footrest.
Place the footrest in a higher
position.
23
M400
Solution
Normal sound
In automatic mode with the