Franke SLIM45 Manual De Instalación Y Servicio página 14

EN
Model SLIM75BF
1. Remove sink stopper. Turn on a medium
flow of cold water.
2. Scrape in food waste.
Down the drain go table
scraps, vegetable peelings,
cobs, rinds, pits, bones and
coffee grounds (fig. 6A).
3. Insert stopper to start disposer (fig. 6B).
6B
shut the disposer off.
4. Run disposer for 15 seconds after shredding
stops. This ensures that all waste is
thoroughly flushed through the drain.
5. To fill sink, insert stopper and align the
6C
switch plunger, water can drain, but
tableware, etc., cannot be accidentally
dropped into disposer.
Caution
Cold water recommended.
Do not use the food waste disposer with hard
materials like glass or metal.
Turn the machine off or unplug it while trying
to unblock a blocked turntable with a wooden
spoon.
SLIM45 / SLIM50 / SLIM75 / SLIM75BF / SLIM100 / SLIM125
6A
One of the two small slots in
stopper base must line up
with switch plunger inside
the neck of the disposer.
Push down firmly to turn the
disposer on. Lift stopper to
largest slot with the switch
plunger (fig. 6C). Push down
to seal sink without starting
the disposer. When medium
sized slot (fig. 6B) in stopper
base is lined up with the
Do not put inside:
– Caustic Soda and drain cleaning chemicals
(Hydrochloric and muriatic acid),as they
cause serious corrosion of metal parts.
If used, resulting damage can be easily
detected and all warranties are void.
– Fat and oil in excess
– Plastic materials
– Pumpkins
– Banana skin
– Leaves of pineapple
– Asparagus
– Artichokes
– Shell (es. oyster, mussel, ecc.)
– Medicine
– Metal (bottle top)
– Plastic pieces
– Cow bone a/o large bones
To be put inside:
– Corn cobs
– Little bones (es. chicken and rabbit bones)
– Nut shells
– Meat scraps
– Melon and watermelon skins
– Fruit pips
– Grape pips
– Rice
– Grounds of coffee
– Eggshells
– Fishbones
– Fish heads
– Pasta
– Vegetables or vegetable peel
– Cheese
– Bread
– Soup
14