Publicidad
Idiomas disponibles
Idiomas disponibles
4
UNPACKING
Do not attempt to assemble or use this product without all of the necessary parts.
If any parts are missing, please contact our helpline at (800) 541-7027 and await
the arrival of missing parts. Use of this product with damaged or missing parts
could result in serious personal injury.
Before assembly, make sure that the tool is switched off and the battery is
removed.
Do not attempt to modify this product or create accessories not recommended for
use with this string trimmer.
PACKING LIST
- Green Machine
Cordless String Trimmer Attachment
®
- Safety Guard for String Trimmer
- Operator's manual
Follow these unpacking instructions to begin operating your Green Machine
string trimmer attachment.
1. Carefully remove the tool and all accessories from the carton.
2. Inspect the tool carefully to make sure that nothing was damaged during
transportation.
3. Once you have confirmed that the tool is complete and working, dispose of all
packing materials using responsible recycling and disposal practices.
4. If any parts are damaged or missing, please contact our helpline or return the
product to the place of purchase.
5. Charge your battery pack fully before operation.
Page 12-English
Cordless
®
GREEN MACHINE 62V CORDLESS STRING TRIMMER
5
ASSEMBLY
Always be sure that the tool is switched off and the battery pack is removed before
carrying out any work on the tool. Failure to switch off and remove the battery
pack may result in serious personal injury from accidental start-up.
Never start the tool unless it is completely assembled. Operation of the tool in a
partially assembled state may result in serious personal injury from accidental
start-up.
Danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type.
5.1 SAFETY GUARD ASSEMBLY
Never use the tool unless the safety guard is properly fitted.
Always wear gloves when mounting or replacing the safety guard. Be careful of the
blade on the safety guard and protect your hands from being injured by the blade.
1. Unscrew and remove the four bolts and washers from the base of the shaft
(Fig. 2A).
2. Lift the trimmer head and face it upward. Align the four mounting holes in the
guard with the four assembly holes at the base of the shaft. Make sure that the
internal surface of the guard faces toward the trimmer head. (Fig. 2A)
3. Hold the guard in place and screw the four bolts on with the washers (Fig. 2B).
F
. g i
2A
GREEN MACHINE 62V CORDLESS STRING TRIMMER
F
. g i
2B
Page 13-English
Publicidad
