VEVOR HM-594 Manual Del Usuario página 10

Push the Cover upwards and secure
it with the two screws that
dis-assembled from the cover at
step 2.
The dance pole is at static mode after initial assembly.
To change the pole mode from static to spinning - loose the Static/Spin
screws on the both sides of the Base shaft - DO NOT ROMOVE
COMPLETELY - the pole will now spin freely.
To return to static, full tighten the Static/screws on the both sides of the
Base shaft.
Loose the Static/Spin screws on the
both sides of the Base shaft before
use. DO NOT completely remove
the screws.
The adjusting hole need to be in line
with the "Y-Mark"on the base.
STATIC & SPINNING
- 8 -