Publicidad
Idiomas disponibles
Idiomas disponibles
MONTAJE Y OPERATIVA
1. Place the machine somewhere flat and stable. You can also hang the machine on a wall
using the anchor holes (23).
2. Insert the fragrance absorption tube (29) into the fragrance bottle supplied (28) so that
the fragrance absorption filter (30) is located at the bottom of the bottle.
3. Screw the fragrance bottle (28) into the lower hole on the fragrance head (31). Make
sure it screws in all the way to the end.
4. Connect the machine to an electrical outlet using the power input connection (1). Make
sure the voltage is correct (220V or 110V depending on the version of the machine).
5. Insert the nozzles (25) for the tube that you want to use by screwing them into the
fragrance diffuser holes (24). You must cover the fragrance diffuser holes (24) that you
do not need to use with a cap supplied (26).
6. Connect the fragrance tube (27) by inserting it into the tube nozzle (25) and position the
other end of the tube where you need it. Make sure the fragrance tube (27) is always
angled towards the BREEZER machine so that the excess oil always goes back to the
machine by gravity.
PREPARING THE MACHINE
4
INSTRUCTION MANUAL
ENG
Publicidad
