Oh!FX BREEZER Manual De Instrucciones página 8

14. To program daily power-on and offs, press the "Work Edit" button D (10).
15. Select the day of the week on which you want to add an action by repeatedly pressing
the "Day Sel." button (6) until the desired day appears on the display.
16. Press edit button C (ON/OFF) (9) repeatedly until "ON" appears on the display.
17. Press edit button A (HOUR+) (7) and B (MINUTE+) (8) to select the exact time for the
machine to begin operating.
18. Press edit button D (WORK EDIT) (10). The display will continue indicating the same
day of the week. Now you must indicate at what time you want it to stop. To do so:
19. Press edit button C (ON/OFF) (9) repeatedly until "OFF" appears on the display.
20. Now indicate at what time you want the machine to stop by pressing edit button A
(HOUR+) (7) and B (MINUTE+) (8).
21. If you want to add more start and stop times for the machine on the same day, press
edit button D (WORK EDIT) (10) and repeat steps 16 to 20. You can programme up to 8
actions for the same day (4 on and 4 off).
Each of the actions is numbered "T1, T2, T3... T8". This numbering appears on the
display at all times during the programming.
22. If you have finished with the programming, press the "Exit" button (11). If you want to
add actions on another day of the week, press the "Day Sel." button (6) repeatedly until
the desired day appears and repeat steps 16 to 20. To finish programming, press the
"Exit" button (11).
23. To set the desired intensity, follow the steps indicated in the REGULATING INTENSITY
INSTRUCTION MANUAL
8
ENG