Publicidad
Idiomas disponibles
Idiomas disponibles
*To regulate the intensity, use the modes REGULATED CONTINUOUS and REGULATED
WEEKLY TIMER. Follow these steps:
1. Press the time on "Edit" button (14). The two digits that indicate the minutes will begin
to flash.
2. Press the "up" and "down" buttons (15) (16) to set the "time on" minutes. If you only want
the machine to turn on for a few seconds, leave the minute digits at "00".
3. Press the time on "Edit" button (14) again. The digits indicating the seconds will begin
to flash.
4. Press the "up" and "down" buttons (15) (16) to set the "time on" seconds.
5. Press the time on "Edit" button (14) again to finish programming the time on.
6. Press the time off "Edit" button (18). The two digits that indicate the minutes will begin
to flash.
7. Press the "up" and "down" buttons (19) (20) to set the "time off" minutes. If you only want
the machine to be off for a few seconds, leave the minute digits at "00".
8. Press the time off "Edit" button (18) again. The digits indicating the seconds will begin
to flash.
9. Press the "up" and "down" buttons (19) (20) to set the "time off" seconds.
10. Press the time off "Edit" button (19) again to finish programming the time off.
11. The BREEZER machine will begin operating at the selected intensity once the machine
has been restarted.
*Look at the following table of examples to program the regulated continuous mode.
DESIRED INTENSITY
10%
25%
50%
60%
75%
90%
REGULATING INTENSITY
TIME ON
00:03
00:05
00:05
00:06
00:06
00:09
9
INSTRUCTION MANUAL
TIME OFF
00:27
00:15
00:05
00:04
00:02
00:01
ENG
Publicidad
