Set-Up Instructions; Assembly - Whittaker Smart Care TRIO Manual Del Operador

SET-UP INSTRUCTIONS

R
Your Smart Care TRIO machine is designed to give
y o u e x c e l l e n t p e r f o r m a n c e a n d l o n g l i f e .
This machine is ideal to clean carpeted floors in facilities
like offices, schools, hospitals, airports, hotels,
casinos, and similar commercial applications.
Reading this manual will help you get the
most from its many features.

ASSEMBLY:

In the two boxes you will find: machine base
(shipped with brushes installed),
and the handle assembly.
A. Remove the machine base from the packing
and place it squarely on the floor. To do this,
raise the bottom handle upright until it locks.
B. Remove the handle assembly from the packing
and place it on a scratch - free surface.
C. Place assembled handle on handle cone assembly
indicated by the arrow in fig. Plastic cord holders
should face towards rear of machine, the same as
large cord hook.
Be sure the connector assembly is locked in
completely or the connectors may break and
possibly cause damage to the locking
mechanism.
To attach the handle, grasp the ribbed plastic
connector (1) at the base of the handle, align
with the two cones on the lower handle bar,
press down and turn clockwise until it clicks
into place. To remove handle, turn counter-
clockwise and lift up.
A
B
C
(2)
2
1
1