Orbis VIARIS UNI Manual De Usuario página 74

MAINTENANCE
In the design of the equipment, it is expected that the maintenance will
be very reduced according to the long life of its components, being
limited to cleaning tasks, checking the operation, and verifying the input
voltage values. It is recommended to perform an inspection of the
equipment once a year.
To clean and check the connections of the equipment it is very
important that it is disconnected from the power supply
voltage. Any handling involving the opening of the equipment
must be carried out by personnel with sufficient and duly authorised
technical qualifications.
For external cleaning of the equipment it is recommended to
use a soft, dry cloth, for example, a microfiber cloth. Do not use
abrasive materials or detergents.
REPLACEMENT OF THE BATTERY
The equipment carries a
CR2032 battery of 3 V.
To replace the battery or
for its extraction at the
end of the product life,
remove the screws that
fix the protection and
the power selection dial
to access the
where it is housed.
ATTENTION: This product incorporates a battery. Do not
dis-pose of the product without taking the precaution of
disassembling the battery and depositing it in a suitable
container for recycling.
circuit
73