Orbis VIARIS UNI Manual De Usuario página 76

EXTRAS
VIARIS UNI chargers can incorporate, depending on the model:
- Only for VIARIS UNI+ and VIARIS UNI+ BT2:
 Base Schuko
Charging modes 1 and 2 (N/A in UK)
 Single Phase / Three-phase energy meter
Certified according to the MID Directive (2004/22/EC) According to EN
50470-3.
 Electrical protections magnetothermal + differential
Magnetothermal protection suitable to the current of the smart charger
+ differential current protection. Carried out the electrical installation
check the differential operation by pressing its test button.
 Complete electrical protections according to ITC-BT-52
Against temporary and transient surges + magnetothermal switch (mag-
netothermal protection suitable for intelligent charger current) + differ-
ential current protection. Carried out the electrical installation check the
differential operation by pressing its test button.
- All the models:
 Ethernet communication
For installations requiring Ethernet communication.
The configuration is done by accessing the web platform of the charger.
You must choose between DHCP (dynamic IP assignment) or IPStatic,
where you will have to fill in the ethernet network data (IP, MAC, Gateway,
Subnet Mask, DNS Server) provided by the person responsible for it.
 Communication 4G
Wireless communication can be installed using a Wi-Fi USB Dongle.
It is a requirement that you configure in the USB dongle an access point
with SSID: ORB_VIARIS_4G and PASSWORD: ORB1234$, in addition to set-
ting up the APN depending on the operator providing you with the SIM
card.
75