FICHERO 3561 Manual De Instrucciones página 6

• Avoid long-term exposure to direct sunlight.
• Do not place, store or use the product near water.
• Do not let moisture come into contact with any electrical parts.
• Always unplug before replacing a roll and for long-term storage.
• Do not attempt to repair, disassemble or alter the product yourself.
• Do not use scouring pads or an abrasive detergent to clean the device.
• Handle with care.
5. Operation
1. Search for Luck Jingle in the App Store and install the app.
2. Turn on the printer and activate Bluetooth on your device.
3. Double-click the power button and the printer will print out a QR code.
4. Open the app and click on 'Not connected'.
5. Click 'Scan to add' and scan the QR code to connect your device to the printer...
Note:
• Do not search for the printer in the Bluetooth settings of your device.
• The printer reconnects to your device automatically after initial pairing.
Charging
• Connect the printer using the supplied micro-USB cable directly to a power source
(e.g. laptop) or to the mains via a 5V USB AC adapter.
• You can print an image while charging.
• Charging time is about 3 hours.
LED battery status
• LED flashes red: low battery
• LED lights up red: charging / out of paper / overheated / cover is open
• LED lights up green: fully charged / standby / power on
• LED lights up orange: malfunction
Replacing/Loading a roll
1. Open the roll compartment(fig. 1).
2. Insert a thermal roll. Make sure the heat sensitive side of the roll faces up, so it will
touch the print head (fig. 2).