Loading The Cutlery Rack; Height Adjustable Tray - LG LDF8874ST Manual Del Propietário

20 OPERATING iNSTRUCTiONS
LOADING THE CUTLERY RACK
(on some models)
HEIGHT ADJUSTABLE TRAY
(on some models)
Each side tray can be adjusted independently to a high or low
position to accommodate different sizes of utensils or cutlery. Re-
move dishes before adjusting the tray.
The cutlery rack is best suited for washing flatware and most cook-
ing or serving utensils. The separators on the cutlery racks help keep
flatware separated to avoid damage and improve cleaning. The rack
can also accommodate small prep bowls and lids. Using the rack al-
lows you to remove the silverware baskets from the lower racks.
NOTE: For best cleaning performance, place flatware in the silver-
ware baskets. Heavily soiled utensils or items with baked on foods
should be placed in the middle rack or spoon basket for best per-
formance.
.................................................................................... II ........................................................................................
Right
Sample lO-place setting.
Alternate
_) L_&-.........
Wrong
Each tray is adjusted by lifting it out and rotating it front to back.
Removing "the Cu'rlery Rack
The entire cutlery rack can be removed if more space is needed on
the upper rack for larger items.
-@
NOTE
AIways remove the cutleryfrom the rack before removing
the rack.
If the handles of your flatware
are too thick, then reverse the
pieces so that the handles face
the other direction, as shown
in the bottom figure.
Pull the rack out to the end of the rails. Then, lift the front of the
rack so that the rollers clear the stop on the end of the rail. The
rack can now be slid forward and removed from the rails.
A WARNING
Be careful when loading and unloading sharp edged items. Load
sharp knives with the blade down to reduce the risk of injury.