Unitek Y-3322 Manual página 5

Connection
1. Connect an IDE/SATA Hard Drive to the Adapter.
2. Connect Micro USB cable and DC Jack to the Adapter.
3. Connect Adapter with computer by USB cable.
4. Power on the device with the power switch, lower right
corner ofcomputer will pop up a mobile device prompt after
device was recognized,and there will also be a prompt in file
manager.
Note: Plug and Play for normal use, for OTB function please
install the software from the CD.
1. Introduction of Backup Function
1) Install the OTB software from the CD.
2) Select the drive of the target device.
2