Publicidad
Idiomas disponibles
Idiomas disponibles
situation, it can read and write with the speed of
USB3.0(5Gbps). Please make sure your host (computer)
supports USB3.0 specification. Otherwise, there will be only a
corresponding speed of either USB2.0 or USB1.1. Also, the
speed will be affected by different SATA interface too.
Q: After installing new HDD / SSD, why I can' t find it on "My
Computer" ?
A: You must do "partition" (format) for hard disk before using it.
Q: Why Windows XP can' t recognize the hard disk which is
more than 2TB?
A: Windows XP has limitation, it able to read up to 2TB(max)
hard disk only. We suggest to upgrade the OS to Vista(64bit)
and above. Recommended to convert the disk GPT disk
partition, otherwise the OS will not support more than 2TB of
disk partition.
Q: How to remove the device safely?
A: It' s recommended to click "Safely Remove Hardware and
Eject Media" on bottom right of your screen.
Q: Why I can' t use two IDE hard drives at the same time?
A: When using two IDE hard disks at the same time, the
2.5-inch IDE hard disk will default to the main disk, and the
3.5-inch IDE hard disk needs to be set as the slave disk, Look
at the label on the 3.5-inch hard drive, adjust the position of
the needle cap in the slave mode, and connect the 3.5-inch
hard drive power cable.
PS: It is recommended that to search online for how to format
the hard disk on Windows/MacOS. Please backup the data
before formatting.
Warranty
The Unitek USB to SATA IDE Hard Drive Adapter is covered
by Unitek warranty for 24 months. If the USB to SATA IDE
Hard Drive Adapter fails due to manufacturer defects, please
contact us by email at support_us@unitek-products.com.
6
Publicidad
