Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
1. Examining the battery and the battery charger
Carefully inspect the battery, battery charger, and connection cord of the battery charger for any signs
of damage, such as cracks or broken parts. Replace if necessary.
2. Cleaning the product, the battery, and the battery charger
Carefully inspect the battery, battery charger, and connection cord of the battery charger for any signs
of damage, such as cracks or broken parts. Replace if necessary.
3. Replacing the cutting line
Note: Do not put more than 0.157" (4.0 mm) of
cutting line in at a time.
3a. Prepare a 26.8-inch (680 mm) strip of nylon
3a
cutting line with a diameter of 0.118/0.157 inches
(3.0/ 4.0 mm) .
= 0.118/0.157 in.
26.8 in.
(3.0/4.0 mm)
(680 mm)
3b
3b. Remove any leftover cutting line (G) from the
trimmer head.
G
Feed the cutting line (G) through the hole and push
it until it exits the opposite hole.
3c
3c. Ensure the length is equal on both sides then
wrap around the winding rod as shown in the
figure.
15
Publicidad
