Publicidad
Idiomas disponibles
Idiomas disponibles
USE AND OPERATION
If the safety thermostat is tripped, the appli-
ance has to be restored to the initial working
conditions as follows.
IMPORTANT: Before doing any work,
cut off the mains electricity supply.
Turn off the gas supply tap.
1)
Undo the screws (A) and remove the control
2)
panel (B).
Press the button (C) of the safety thermostat
3)
to restore the gas supply.
Replace the control panel (B) on completion
4)
of the operation.
Turn the gas supply tap back on and switch
5)
the main electricity supply back on.
In case of lengthy downtimes, as well as dis-
connecting all supply lines it is also essential
to clean all internal and external parts of the
appliance and the surrounding environment
thoroughly, complying with the Manufacturer's
instructions and the relevant applicable laws.
If the appliance is to be out of use for a lengthy
period, proceed as follows.
Turn off the gas supply tap.
1)
Cut off the mains electricity supply using the
2)
appliance's master switch.
3301360_ut_GB_rev.2
RESETTING THE APPLIANCE
LENGTHY DOWNTIMES OF APPLIANCE
B
A
Clean the appliance and the surrounding ar-
3)
eas thoroughly.
Spread a fi lm of edible oil over the stainless
4)
steel surfaces.
Carry out all the servicing procedures.
5)
Cover the appliance and leave a few gaps to
6)
allow air to circulate.
ENGLISH
C
23
Publicidad
