Truper ASP-5X Instructivo página 19

Assembly
B
1
A
Accessories
C
• Insert the hose into the vacuum port, and twist it clockwise
to secure it in place (F).
• If necessary, connect one or more extension tubes to the
free end of the hose.
• Choose the appropriate nozzle and connect it to the free
end of the hose or if necessary to the extension tube (G).
F
Start Up
Switching on and off
• To turn the vacuum cleaner on, plug the power cord into
the electrical outlet.
• Turn the switch to the "I" (ON) position.
• To turn the vacuum cleaner off, turn the switch to the "O"
(OFF) position, and unplug the power cord from the
outlet.
• Always verify that the switch is in the off
CAUTION
position before connecting the power cord to the outlet.
• Pull the latches (A) outwards to lift the container lid (B).
• Remove all accessories from inside the container.
• The dry vacuum filter (C) is factory installed, remember
to use the vacuum cleaner with one of the filters installed
otherwise the motor will be damaged and the warranty will
be void.
• Turn the container (D) upside down and place the four
casters (E) in their respective mounts on the base of the
container. Rotate the container again to support the casters
B
on the floor.
• Place the motor cover back on the container until the
latches click.
• Insert the handle (B
that both mamelons are inserted into the lid boxes. Attach
the handle using the 2 screws provided in the bag.
Accessories
) into the container lid, make sure
1
E
D
Switch
ENGLISH
G
7