Indel B SAFE 10 PLUS Instrucciones Para El Uso página 21

PRELIMINARY SETTINGS
IINITIALIZATION / RESET
This operation is required only for Safe already used and initialized. It is not necessary with new
Safe, just purchased and installed.
To reset memory, press the RESET button (see Instructions for Use chapter); after three acoustic
signals ("beep") the Safe initialization has been completed and the keys and codes memorised
have been cancelled.
OWNER KEY
The Owner Key is the "mother" key necessary for the configuration of the Safe and its opening in
case of emergency.
OWNER KEY (RED OR BLUE) ACTIVATION
Once the initialization has been done, put the first IB key (red or blue) on the receiver. After
three acoustic signals ("beeps") the Safe opens and the IB key becomes the Owner Key. The first
electronic key resting on the safe becomes the Owner Key (red or blue). For each Safe only one
Owner Key will be set.
SAFE OPENING WITH THE OWNER KEY
Place the Owner Key on the receiver, after one acoustic signal ("beep") the Safe will open.
OWNER KEY ERASURE
Press the RESET button (see Instruction for Use chapter), after three beeps the Owner Key
will be erased.
Owner Key
or
Master Key
Receiver
19