Descargar Imprimir esta página

Citizen CBM1000II Serie Manual Del Usuario página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CAUTION
Place the printer on a flat surface.
Otherwise it may drop off from its position.
Be careful where you place the printer and what is placed near it.
• Take care that a nearby wall or some kind of cloth does not block
printer ventilation holes.
• Do not use the printer with any object placed on it.
Be careful about internal heat buildup, which could cause fire and
deform the case.
• Avoid using the printer near a radio or TV set or from supplying it
from the same outlet as these appliances.
• For interconnections, use shielded or a twisted pair of cables and
ferrite cores, or other anti-noise devices.
• Avoid using the printer with a device that is a strong source of noise.
The printer may have an adverse effect on nearby radio or TV
transmissions. There may also be cases when nearby electrical
appliances adversely influence the printer, causing data errors or
malfunction.
Use the printer with its grounding post connected to a convenient
grounding facility.
If leakage occurs electric shock may result.
Do not connect the printer's grounding post to any of the following
facilities:
• Utility gas piping
A gas explosion could result
• Telephone line ground
• Lightning rod
If lightening strikes a large surge of current may cause fire or
shock
• Utility water pipes
Plastic water pipes should not be used for grounding. (Those
approved by a Waterworks Department may be used.)
Before connecting or disconnecting the grounding lead to or from the
printer, always unplug it from supply outlet.
Before connecting or disconnecting the power cord or interconnect
cables to or from the printer, always turn the entire system power off.
When disconnecting a cable, do not pull out by the cable. Always hold
the plug.
Firmly insert the cable plug into its mating socket.
A cross connection may damage the printer's internal electronics
or the host system's hardware.
Only use the printer with devices that have designated solenoid
specifications for the drawer kick-out connector.
Neglecting this caution may result in malfunction or failure.
— 7 —

Publicidad

loading