Create WARM SILENCE DC Manual De Usuario página 10

• Insert the plug into a socket, turn on power switch and the machine enters the standby
state.
• Click the power button of the host, the buzzer will prompt you to click, and the fan will
start running. Press and hold the power button for 2 seconds, the buzzer will prompt you
twice, and then stop running after you release the hand.
Air Volume Shift
• When the host is in operation: click the main power button to switch the air volume from
1 to 9.
Oscillating operation
• Press and hold the power button for 1 second, the buzzer will beep once and the fan will
start oscillating.
• Press and hold the power button for 1 second again, the buzzer will beep once and the
fan will stop oscillating.
INSTALLATION LOCATION AND PRECAUTIONS
Location
• Please place the heater and fan in a level surface. Please do not use in very hot and humid
environments (bathroom and kitchen).
Safety System:
• This heater and fan includes an overheat protection sensor and an automatic fail-safe that
cuts power to the unit if it's accidentally tipped over or overheat. If this sensor is triggered,
unplug the machine and allow the fan to cool.
• Check and remove any obstructions before restarting the heater and fan and be sure to place
it on a hard, level surface.
E NGL I SH
10
Do not cover,
high tempe-
rature
Do not place
anything within 1
meter
HOST
Keep distance