Create WARM SILENCE DC Manual De Usuario página 9

• The remote control should be pointing at the signal receiver on the display to maximize the
remote control signal.
• Effective distance: 5 m.
Attention:
1. This bladeless heater and fan may react when using a remote device for other appliances.
2. When using the remote control of this bladeless heater and fan, other electrical appli-
ances may react.
• The switch on the remote will turn this fan to standby, not complete shutdown. Use the
switch on the main unit to completely power off when this heater and fan not in use.
• If this heater and fan is not in use for a long time, please unplug the power cord.
• Press the warm mode button and the display shows the ambient temperature.
• Press temperature button to set the temperature, and the display will flash digitally, which
can be set from 1 to 30 °C.
• Set temperature should be higher than the ambient temperature, so that the heating func-
tion will be turned on.
• When the ambient temperature reaches the set temperature, the heating function will stop
and turn into a cool breeze.
• The ambient temperature is lower than the set temperature and the heating function will
automatically be activated.
Note: The default setting temperature is 20 °C. In the warm mode, when the ambient temper-
ature is below 0 °C, the display only shows 01, do not display negative temperature values.
The warm air mode runs over 9 hours, the machine will automatically stop running. Restart
by pressing the host power button or by using the remote control.
• Use the remote control to set heating mode temperature as the host does not support
this operation.
OPERATING INSTRUCTIONS
HEATING MODE INSTRUCTIONS
Ambient temperature
Set temperature
E NGLI SH
9