Create WARM SILENCE DC Manual De Usuario página 8

You will hear a beep sound when you press the button on the fan / heater or remote control
every time.
On / Off
The device can be switched on and off by pressing the On / Off button.
Sleep
• Press the Sleep mode button on the remote control. The display shows L and the wind
speed becomes minimum.
• Press again to exit the Sleep mode.
• You can also exit the current mode by pressing the Wind Strength + button.
Strong wind mode
• Press Strong wind mode button on the remote control. The display shows H and the wind speed
becomes maximum.
• Press again to exit the turbo mode.
• You can also exit the current mode by pressing the Wind Strength + button.
Oscillation
Press the Oscillation button to turn on the oscillation function. This fan can swing left and
right 80º.Press this button again to stop oscillating.
Mute
Press this button to turn off the tone of the fan / heater. It will cancel the beep sound.
Cool mode
• In cooling mode, the LED lamp is blue.
• Press this button to activate the cooling mode.
Note: The default start mode is the cooling mode.
+ / -
• Press the "+" or the "-" button on the left side of the remote control to increase or de-
crease the airflow. Cool mode can be used for 9-level settings, warm mode can be set
for 4 levels.
• In heat mode, press the temperature button on the right side of the remote control to set the
temperature (1-30 ºC).
Note: This button does not work in cool mode.
Heat mode
• The display number in heat mode is red.
• Press this button to activate the heat mode.
Note: In heat mode there is no strong mode and sleep mode.
Timer
Press the timer button on the remote control to set 1 to 8 hours of timing.
E NGL I SH
8
FUNCTIONS