Descargar Imprimir esta página

Waterworld Proline-350EZ Manual De Instalación Y Servicio página 7

Sistema de agua potable por ósmosis inversa

Publicidad

Idiomas disponibles

Idiomas disponibles

Tools Required:
1) Hand drill for faucet hole. Use the appropriate bit for the surface you are
drilling. (½" for non air gap faucets and - 7/8" drill bit for air gap ones).
A) Titanium bit for metal sinks.
B) Glass and tile bit or Relton cutter for porcelain sinks.
C) Diamond core bit for granite.
2) Phillips head screwdriver.
3) Adjustable crescent wrench.
4) Basin wrench.
5) ¼" drill bit for drain clamp.
DRILLING THE HOLE FOR THE FAUCET
NOTE: SAFETY GLASSES SHOULD BE WORN TO PROTECT YOUR EYES WHILE DRILLING
THE FAUCET WHOLE.
1) For best results, a 1/2" drill bit for a non air gap faucet or 7/8" dill bit for an air gap faucet
should be used to drill a hole into your sink for the auxiliary faucet.
2) Carefully select the faucet location making sure it will have a neat water fall pattern and
that the faucet stud will be accessible from below once the whole is completed.
3) For Porcelain Sink: Before starting the drill motor, apply firm downward pressure on the
bit until a crunching occurs. This will help keep the drill from moving when starting the
hole. Use a special porcelain hole cutter.
4) For Stainless Steel Sink: Before using the selected bit, an indent should be made with a
center punch to keep the drill bit from moving. A small pilot hole will also aid the
drill process.
5) For best results, keep steady firm pressure while drilling the hole. Too little pressure
during the start will cause excess wear on the bit and progress will be slow.
6) Once the hole is complete, clean the area of metal chips and roughness around the hole.
Metal chips will stain porcelain.
Warning: It is highly recommended for granite slate countertops, to use the assistance of a
trained professional to drill the hole for the faucet. Serious damage can occur to the counter
if done by an inexperienced person.
6

Publicidad

loading

Productos relacionados para Waterworld Proline-350EZ

Este manual también es adecuado para:

Proline-450ezProline-550ez