La Sommeliere LS48.2Z Manual De Utilización página 39

Idiomas disponibles

5. Reinstall door seal.

5. OPERATING INSTRUCTIONS

It is recommended that you installed your appliance in a place where the ambient temperature is

between 23-26°C. If the ambient temperature is above or below recommended temperatures, the

performance of the unit may be affected and it may not be possible to obtain temperature between 5-

12°C for the upper zone and between 12 – 20°C for the lower zone.

How to set temperature

To turn on your wine cellar, you have to plug it and to turn off the appliance, you need to unplug it.

Your wine cellar is equipped with a control panel lock feature. The lock will automatically activate 20

seconds after the last button is pressed.

- Press the button

indicating that the control panel is locked.

- Press the button

indicating that the control panel is unlocked.

You can adjust the temperature of your cellar using the

temperature of the upper zone, press the key

5 and 12°C. To adjust the temperature of the lower zone, press the key

the temperature between 12 and 20 °C. Press the button once, the temperature will increase or

decrease by 1 °C.

Set the temperature, inside the wine cellar by pressing the

buttons to adjust the temperature in 1 increments.

You can select the temperature to display in Fahrenheit or Celsius by long pressing the

for 2 seconds.

Turn the interior light on or off by short pressing the light bulb symbol button

IMPORTANT: to optimize the functioning, it is important to respect a setting difference about 5°C

between upper and lower compartment (for example 9°C in the upper zone and 14°C in the lower

zone).

The set temperature of the top compartment must be always coldest than the top compartment. So the

lower compartment is always the hottest zone.

Function instruction

for 5 seconds to lock the access to the settings. You will hear a "BEEP"

for 5 seconds to unlock access to the settings. You will hear a "BEEP"

and

you can then choose the temperature between

(increase) and

keys. To adjust the

then you can choose

(decrease)

button