Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT DESCRIPTION
Contents of the box
1# estructura base/base structure
aceite silicona/
instrucciones/
silicone oil
instructions
CONNECTIVITY
Once the treadmill is turned on, connect the bluetooth of your mobile device to
the treadmill (BTMP3).
DISPLAY
SPEED: shows the current speed (1.0 Km/h - 6.0 Km/h).
TIME: Shows the elapsed training time in minutes and seconds.
DISTANCE: Shows the distance accumulated during the training.
CALORIES: Shows calories burned during training.
OPERATION
1. Connect the treadmill to power and press the power button. 0.0
will appear on the initial screen.
2. In standby mode, press the start/stop key to start or stop the
treadmill.
3. Press the P button to select the preset training programs mode
(P01 to P6) or M to select the manual mode.
4. In manual mode, through the up/down key, the speed can
be set between 1.0 km/h and 6.0 km/h. The execution time is
sequential and cannot be configured. It will stop automatically after
60 minutes. When working, press the up/down key to adjust the
speed; 3 seconds later, you will return to the home screen.
5. In program mode, the speed works according to the program
llave/ key 6mm
preset values. When the speed changes at the end of each period,
a beep will sound 3 seconds before to warn. You can also adjust the
speed and the treadmill will automatically load the speed of the next
segment of the preset program. Program mode lasts 20 minutes
and cannot be configured.
6. Upon starting the running mode, the treadmill will go through a 3
second preparation stage before starting to move. Once running,
you can use the MODE key to change the information displayed on
the screen between speed, time, distance and calories. The screen
will automatically switch between these displays every 5 seconds.
7. Press the PROG button to select the workout (P01 to P06). Use
the SPEED + or SPEED - buttons to adjust the settings.
SPEE D
TIME
CA L.
DIST.
11
Remote control
Battery CR2032
To turn the machine on/off.
+
M
To select preset training programs
P
-
(P01-P06).
M
To select manual mode.
P
+
Press the button to increase the
speed.
-
Press the button to lower the speed.
EN - MC-80
Publicidad
