Publicidad
Idiomas disponibles
Idiomas disponibles
Page 4
Section 2
Attach Halo to Pivot Linkage Assembly
4mm Hex Key
Screw, M6 X 16mm
Turn the Sunrider Assembly upside down then attach
Halo to the Pivot Linkage Assembly using the M6 X
16mm screws (2 per side)
Repeat this step on the other side of the assembly.
Installation Instructions - Sunrider for Hardtop
P4 - 52461 Rev. M 0424
© 2024 Bestop, Inc.
Publicidad
