Publicidad
Idiomas disponibles
Idiomas disponibles
Section 5
Attach SRHT Attach Brackets
Inside front edge of Hard Top
Remove Hardtop Latch Receiver Screws
and retain for future Hardtop installation.
P7 - 52461 Rev. M 0424
T40 Torx Driver
Place the M8 X 16mm washers between the attach bracket and the
hard top then install the M6 X 20mm screws.
Tighten all four screws at this time.
Installation Instructions - Sunrider for Hardtop
T40 Torx Driver
Attach the Center Halo Bracket to the Sunrider
using two (2) M8 X 25mm Screws and two (2)
M8 washers. Leave loose at this time.
4mm Hex Key
Page 7
M8 Washer Black
Screw,M8 X 25
M8 Washer Black
SCREW, M6 X 20
© 2024 Bestop, Inc.
Publicidad
