Publicidad
Step 19
å
Refer to the enlarged diagram to identify the parts on the HINGE.
å
The DOOR may need some adjustments. Follow the text below
to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR from side to side (horizontal), turn the
adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen both vertical
adjustment screws. Move the DOOR up or down to the desired
location. Tighten the screws after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting screw
one turn and move the DOOR in or out, as needed. Tighten the
mounting screw after making adjustments.
The PUSH LATCH
is adjustable. If
needed, turn the
PUSH LATCH until
it allows the DOOR
to evenly close.
www.sauder.com/service
Adjusting screw (horizontal)
430755
17
Mounting screw (depth)
(vertical adjustment)
Page 23
Publicidad
