Publicidad
Idiomas disponibles
Idiomas disponibles
Place the body of the light
pre-drilled holes in the base
Screw the body of the light
firmly by tightening the screws
Ensure that the side with the protective felt pad
is facing downwards.
14162802L model only: Connect the
cable inside the lamp arm
by means of the plug-in connector
Carefully insert the lamp arm
body
. The cable must be inserted into the
1
body of the light
1
Make sure that the cable of the plug-in connec-
tor does not become squashed.
Connect the lamp arm
by tightening the screws
Place the assembled light onto the pre-drilled
holes in the base
3
Screw the light onto the base
the screws
.
4
Ensure that the side with the furniture protection
pad is facing down.
Then plug the plug-in mains adapter
a properly installed socket.
Your light is now ready to use.
Switching the light on / off
Switch the light on or off using the touch
button
.
7
Dimming the light
To dim the light hold the touch button
pressed until the desired dimming level has
been reached.
Note: The light has a memory function; it
saves the last dimming level that was set.
Initial use / Maintenance and cleaning / Disposal
onto the
1
.
3
onto the base
1
.
4
or lamp body
9
.
10
into the lamp
9
in a loop (see fig. 2).
to the lamp body
9
.
8
.
by tightening
3
into
6
7
Maintenance and cleaning
3
SHOCK!
Always unplug the plug-in mains adapter
before any maintenance or cleaning.
SHOCK!
1
For electrical safety, never clean the light with
water or other liquids, nor immerse it in water.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Do not use solvents, benzene or similar
substances. They could damage the light.
1
Only use a dry, lint-free cloth for cleaning.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
DANGER OF ELECTRIC
DANGER OF ELECTRIC
GB/IE
6
15
Publicidad
