Bosch 060158F070 Manual Original página 13

OBJ_BUCH-1231-002.book Page 13 Friday, June 22, 2012 12:33 PM
Action
Orbital Action Settings
Adjusting the stroke rate
preselection
Switching on and off
Guide the power tool toward the
workpiece only when switched on
Lubrication when cutting metal
Plunge Cutting
Mounting and use of the parallel
guide
Selecting accessories
Maintenance and Cleaning
For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 15, page 176).
After-sales Service and Customer
Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
Bosch Power Tools
Figure Please observe
7
8
9
10
11
12
13
–
In all correspondence and spare parts order, please always
include the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
English | 13
Page
171
172
172–173
173
173
174
174–175
177–178
1 619 P08 843 | (22.6.12)