6. If the appliance is required to work in continuous mode, press the humidity selector + until the
CO% (
) symbol appears on the screen. Remember that the appliance's operating time
is limited by the capacity of the tank (3 litres).
7. This appliance is equipped with an output flow selector (
humidity flows to be selected.
Low humidity flow
High humidity flow
At first, a High humidity flow is recommended, until the RH% reaches the required value, at which
point it should be changed to a Low humidity flow to maintain the value.
8. When the water tank is empty, the
the tank, it is recommended to clean the appliance, taking into account the above- mentioned safety
recommendations.
MAINTENANCE
- Before carrying out any maintenance operations, disconnect the appliance from the mains.
- Clean all areas that come into contact with water regularly (twice a week) with a damp cloth, includ-
ing the transducer and the steam generation pipe (Fig. 1). Do not use detergents as they could dam-
age the transducer.
- Clean the outside of the humidifier regularly using a damp cloth.
- Make sure the humidifier is clean and dry and the water tank is empty before storage.
TECHNICAL ASSISTANCE
The extensive S&P Official Services Network guarantees the correct technical assistance.
In the event of any anomaly in the operation of the appliance please contact any of the Official Services
listed, where you will be correctly attended.
Any intervention carried out by persons other than the S&P Official Services, will lead to the guaran-
tee being cancelled.
Service network if you are in Spain, or your regular dealer in the rest of the world. To find your nearest
dealer, visit our website at www.solerpalau.com
REMOVAL FROM SERVICE, DISPOSAL AND RECYCLING
• If the appliance is not to be used for any length of time, we recommend returning it to its
original package and storing it in a dry, dust-free place.
• EU regulations and our commitment to future generations oblige us to recycle used ma-
terials; please remember to dispose of all unwanted packaging materials at the appropriate
recycling points, and to drop off obsolete equipment at the nearest waste management
point.
THE MANUFACTURER WILL NOT BE HELD LIABLE FOR DAMAGES TO PEOPLE AND/OR PROPERTY
DUE TO NON-COMPLIANCE WITH THESE WARNINGS.
S&P RESERVES THE RIGHT TO MODIFY THE PRODUCT WITHOUT PRIOR NOTIFICATION.
REFILL symbol will appear on the screen. Before refilling
8
) which allows two different