Gaggenau AL 400 792 Manual De Instrucciones página 14

2 Fold the filter cover forward.
Uninstalling metal grease filter
1 Open the lock and fold the metal mesh grease filter
forward.
2 Take metal mesh grease filter out of the holder.
Notes
‒ Grease can accumulate in the bottom of the
metal mesh grease filter.
‒ Do not hold metal mesh grease filter at an angle,
otherwise grease will drip out.
3 Clean the metal mesh grease filter.
Clean the grease troughs
For better cleaning, it is possible to remove the grease
troughs. The grease troughs can be cleaned in the
dishwasher.
1 Remove the grease troughs.
2 Clean the grease troughs.
3 Insert the grease troughs again.
14
Installing metal grease filter
1 Insert metal mesh grease filter.
2 Fold metal mesh grease filter back in and snap the
lock in.
3 Reset the saturation display by pressing the
button.
The saturation display
Close the filter cover
Grip filter cover in the middle and fold up.
The filter cover snaps in.
Clean the filter cover
For better cleaning, you can remove the filter cover.
1 Open the filter cover.
2 Grip the filter cover on the side with both hands.
3 Lift up the rear portion to the stop and pull the filter
cover forward.
The filter cover can be pulled using the bolts of the
holder.
4 Clean the filter cover
Hook in the filter cover
1 Grip the filter cover on the side with both hands.
2 Push the filter cover onto the bolts of the holder
and lift up in the front until it snaps in.
œ
œ
goes out.