Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
Always disconnect the appliance from the mains socket before assembling or disassembling
accessories.
Hose
1. To fit the hose, push the hose end into the hose socket and turn it
clockwise until it locks into place.
2. To remove the hose, hold the hose end and turn it anticlockwise.
Connecting tubes and accessories
1. Attach the bigger end of the tubes to the hose handle.
2. Adjust the tubes to your desired length.
Push forward the switch on the tube then adjust. Release the switch
until the desired length is achieved.
3. Attach the desired cleaning accessory to the end of the tube.
To remove the tubes and accessories, hold each piece tightly and pull firmly apart.
OPERATION
1. Pull the power cord out of the appliance and insert the mains plug into the mains socket.
A YELLOW mark on the power cord indicates the ideal cable length. Do not extend the power
cord beyond the RED mark.
2. Press the power button on top of the appliance to switch on the appliance.
3. You can quickly reduce the suction power by pushing the air flow regulator on the hose handle.
Push it forward, suction power will increase; push it backward, suction power will reduce.
Air flow regulator
Publicidad
