Proline VCBL700AA Manual De Instrucciones página 7

Using the Cleaning Accessories
Dual position carpet / floor brush (Drawings for reference only)
Position 1: Bristles extended
- For hard floors
Combination tool (dusting brush and crevice tool)
This combination tool is a dual-purpose tool. Use it as a crevice tool to vacuum down the side of
cushions, corners, edges or small spaces. Use it as a dusting brush by turn the head to clean
curtains, etc.
CLEANING AND MAINTENANCE
Always switch off the appliance and unplug from the mains socket before carrying out any
maintenance or cleaning.
Clean the outside of the appliance with a damp cloth. Dry thoroughly before use.
Do not use abrasive or chemical cleaning agents.
Emptying the Dust Tank
1. Press the dust tank release button to remove the dust tank.
2. Turn the dust tank cover clockwise to remove the dust tank cover from the dust
tank.
3. Hold the dust tank over a trash receptacle and then press the dust release button
to open the dust tank door.
4. Fit the dust tank cover back onto the dust tank and turn it anticlockwise until it
locks in place after emptying.
Filters Maintenance
It is very important to keep the filters clean to maintain maximum performance from the vacuum.
Clean the filters regularly. We recommend you replace the filters once a year.
DO NOT use any abrasive or chemical cleaning agents.
Cleaning the filter
1. Remove dust tank cover by turning it clockwise and tap the cover against a trash receptacle.
2. Lift the latch on the lid and remove the filter. Tap the filter or wash it under running water.
Dry thoroughly. Put the filter back onto the lid.
DO NOT USE DETERGENTS TO CLEAN THE FILTER.
Cleaning the air outlet filter
The air outlet filter is located at the rear of the appliance.
Press down on the filter cover latch to remove the filter cover. Remove the air outlet filter.
Position 2: Bristles retracted
- For carpets