3. Save the channel.
Note:
• Channel Setting always starts with channel 1.
• If you do not press any button for approximately 10 seconds in a
specific channel, the channel is automatically saved.
• The channel will be remembered even if you turn off the headset.
• You can use the Sena Motorcycles App to change the channel.
7.4 USING MESH IN GROUP MESH
7.4.1 Creating a Group Mesh
Creating a Group Mesh requires
Open Mesh
You
1. To enter Mesh Grouping to create a Group Mesh, press and hold the
Mesh Intercom Button for 5 seconds on the headset of the
B, and
C).
2. When Mesh Grouping is completed, the
voice prompt on their headsets as Open Mesh switches to Group Mesh.
You
" Group Mesh"
TAP
1x
B
HOLD
5s
B
C
X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM WITH MESH INTERCOM
two or more Open Mesh
C
users (You, B and C)
" Channel is set,
channel #"
users.
Group Mesh
You
B
users (You,
" Mesh grouping"
C
will hear a
27