Nexx X-COM 3 Pro Guia Del Usuario página 28

Note:
• If the Mesh Grouping is not completed within 30 seconds, users will
hear a voice prompt, "Grouping failed."
• If you want to cancel during the Mesh Grouping, tap the Mesh
Intercom Button.
7.4.2 Joining an Existing Group Mesh
One of the current users
(one or more)
Existing
Group Mesh
You
B
C
1. To enter Mesh Grouping to join the Existing Group Mesh, press and
hold the Mesh Intercom Button for 5 seconds on the headsets of
(You) of the current users
users (D and F)
2. When Mesh Grouping is completed, the
voice prompt on their headsets as Open Mesh switches to Group Mesh.
D
" Group Mesh"
Note: If the Mesh Grouping is not completed within 30 seconds, the
current user (You) will hear low-toned double beeps and the new users
(D and F) will hear a voice prompt, "Grouping failed."
in an Existing Group Mesh can allow
in Open Mesh to join the Existing Group Mesh.
Open Mesh
D
in Open Mesh.
HOLD
5s
F
X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM WITH MESH INTERCOM
F
in the Existing Group Mesh and the
new users (D and F)
Existing Group Mesh
You
D
B
" Mesh grouping"
new users
F
C
one
new
will hear a
28