Publicidad
Idiomas disponibles
Idiomas disponibles
4
UNPACKING
Do not attempt to assemble or use this product without all of the necessary parts.
If any parts are missing, please contact our helpline at (800) 541-7027 and await
the arrival of the missing parts. Use of this product with damaged or missing parts
could result in serious personal injury.
Before assembly, make sure that the tool is switched off and the battery is
removed.
Do not attempt to modify this product or create accessories not recommended for
use with this power head.
PACKING LIST
- Green Machine
Cordless Power Head
®
- Front Assist Handle Assembly
- Harness
- Operator's manual
- Battery
- Charger
Follow these unpacking instructions to begin operating your Green Machine
Power Head.
1. Carefully remove the tool and all accessories from the box.
2. Inspect the tool carefully to make sure that nothing was damaged during
transportation.
3. Once you have confirmed that the tool is complete and working, dispose of all
packing materials using responsible recycling and disposal practices.
4. If any parts are damaged or missing, please contact our helpline or return the
product to the place of purchase.
5. Charge your battery pack fully before operation.
Page 10-English
Cordless
®
GREEN MACHINE 62V CORDLESS POWERHEAD
5
ASSEMBLY
Always be sure that the tool is switched off and the battery pack is removed before
assembling the tool. Failure to switch off and remove the battery pack may result
in serious personal injury from accidental start-up.
Operation of the tool in a partially assembled state may result in serious personal
injury from accidental start-up.
There is a danger of explosion if the battery is incorrectly inserted. Only use the
tool with the same or equivalent type of GMBA6200 series battery.
5.1 FRONT ASSIST HANDLE ASSEMBLY
NOTE: Do not operate the tool without the front assist handle firmly in place.
1. Unscrew the locking lever from the front-assist handle. (Fig.2A)
2. Position the front-assist handle onto the upper shaft of the trimmer. (Fig.2B)
3. Move the front assist handle up or down to the desired position, then fully tighten the
nut to fasten it in place (Fig.2C)
Locking lever
F
. g i
2A
Nut
F
. g i
2C
GREEN MACHINE 62V CORDLESS POWERHEAD
F
. g i
2B
Page 11-English
Publicidad
