Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Open the seal on the clean water tank and tip it upside down over a sink to empty out any
water that remains in the tank.
•
Reinstall the empty clean water tank.
•
Remove the self-cleaning nozzle and replace with a wash tool.
•
Press the ON/OFF button to turn on the spot cleaner.
•
Hold the hose handle over a sink and press the water-release button to remove any
excess water from the tank or hose.
Remove the plastic cover from the wash tool. Clean the wash tool with water or detergent
solution if required. Use a soft, damp cloth to wipe away any stubborn dirt. Reattach the
plastic cover on the wash tool, making sure it clicks firmly back into place.
Emptying and cleaning the dirty water tank
Press the dirty water tank release button and slide out the tank.
Lift off the dirty water tank lid. Empty out the dirty water. Pull
out the water inlet pipe and then lift up the float and remove it.
Float
9
EN
Water inlet pipe
Publicidad
