VEVOR JX-DC-10 Manual De Instrucciones página 15

Step 7:
Take 2x pole (part M) and 1x pole (part B).
Connect them with 1x bolt (part E), 1x nut (part K), 1x washer (part H).
The order of the poles must correspond to the order shown in the illustration. First
place a washer over the screw. Then insert the bolt from the inside through pole 1,
then pole 2, then pole 3, then pole 4, then pole 5, then pole 6, then screw the nut
onto the bolt hand-tight.
Make sure that the poles are always aligned counterclockwise.
13