Publicidad
Idiomas disponibles
Idiomas disponibles
2) Enabling the "Fast Cooling" function
Press the "Function" key to select "Fast Cooling" until the corresponding icon gets flickering, and then press the
key within 5s for confirmation. If the "OK" is not pressed within 5s, the setting will be invalidated.
"OK"
3) Exiting the "Fast Cooling" function
Under the "Fast Cooling" mode, press the "Function" key to select "Fast Cooling" until the corresponding
gets flickering, and then press the "OK" key for confirmation. The "Fast Cooling" function will get exited.
When the "Vacation" or "Smart ECO" function is enabled, the "Fast Cooling" function will be disabled
automatically.
★Fast Freezing
1) When the "Fast Freezing" function is enabled, the freezer temperature will be controlled at -32℃ automatically, and
after 26 hours of running, the "Fast Freezing" function gets exited. Cooling down the freezer temperature in a rapid
manner is beneficial to the prevention of food nutrition against lost and the preservation of freshness.
Under the "Fast-Freezing" mode, the freezer temperature is subjected to no adjustment.
2) Enabling the "Fast-Freezing" function
Press the "Function" key to select "Fast Freezing" until the corresponding icon gets flickering, and then press
the "OK" key within 5s for confirmation. If the "OK" key is not pressed within 5s, the setting will be invalidated.
3) Exiting the "Fast-Freezing" function
After a cumulative running period of 26 hours, the "Fast Freezing" function will exit automatically.
Under the "Fast Freezing" mode, press the "Function" key to select "Fast Freezing" until the corresponding
icon gets flickering, and then press the
When the "Smart ECO" function is enabled, the "Fast-Freezing" function will be disabled automatically.
★ Vacation
1） When the "Vacation" function is enabled, the
quite long time, you can set the "Vacation" function to keep the refrigerator running with low energy consumption, while
ensuring the fresh food compartment is free from undesirable smell and the freezer compartment operates normally.
Be sure to take out all foods from the fresh food compartment before setting this function.
Under the "Vacation" mode, the fridge temperature is subject to no change.
2）Enabling the "Vacation" function
Press the "Function" key to select "Vacation" until the corresponding icon gets flickering, and then press the
"OK" key within 5s for confirmation. If the "OK" is not pressed within 5s, the setting will be invalidated.
3） Exiting the "Vacation" function
Under the "Vacation" mode, press the "Function" key to select "Vacation" until the corresponding gets flickering,
and then press the "OK" key for confirmation. The "Vacation" function will get exited.
When the "Smart ECO" or "Fast Cooling" function is enabled, the "Vacation" function will be disabled
automatically.
★ Power cut memory
In case of power failure, the refrigerator will maintain the operating state before power failure when power supply is
restored.
★ Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e., less
than 5 minutes), the compressor will not be started immediately after it is powered on.
★ Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if the freezer sensor temperature is higher than -10℃, digits of the
freezer zone get flickering on the display. The freezer temperature can be displayed when any key is pressed, and
the normal display will be restored when any key is pressed again or after 10s.
★ Door open alarm
If
the fridge door
when any key is pressed, but will be restored after 3 minutes if the door keeps open. The alarms will not be lifted until
the door is closed.
★ Fault alarm
In case E0, E1, E2, EH, or EC is displayed on the operation panel, it indicates fault with the refrigerator. Please
contact the aftersales person for visiting service in such case.
XIII.
Instructions for food storage
Precautions for use
The appliance might not operate consistently (there is possibility of defrosting or temperature becoming too warm in
the frozen food compartment) when sited for an extended period of time below the cold limit of the temperature
range for which the refrigerating appliance is designed
The information of climate type of the appliance is provided on the rating plate.
The internal temperature could be affected by such factors as the location of refrigerating appliance, ambient
"OK"
is open for more than 3 minutes, buzzer alarms will be continuously issued, which can be stopped
key for confirmation, the "Fast Freezing" function will get exited.
fridge
temperature will be controlled at 14℃. When you are out for a
Publicidad
